|
|
 20 HP |
 25 HP |
 35 HP |
 55 HP |
 70 HP |
 82 HP |
 |
NORIKER 354
|
|
Noriker 354 |
Engine Peak Horsepower Working Horsepower PTO Horsepower Rated Engine Speed (rpm) Engine Torque at Rated Speed Type Displacement, cu. in. (liters) Cooling System Air Cleaner |
38 HP (28.3 kW) 35 HP (25.7 kW) 32.9 HP (24.5 kW) 2400 86.9 Ft.lb 3 cylinder diesel
Water Cooling Dry-type |
Fuel System Type Fuel Tank Capacity gal. (liters) |
Direct Injection 7.5 (28) |
Drive System Manual Transmission Clutch Type 4-Wheel Drive Final Drive Differential Lock Power Steering Brakes Parking brake |
Low/High (8+2) Double-Stage, Dry Standard Spur gear Standard Full hydraulic Sealed dry disk Standard |
Hydraulic System Working Pressure Pump (Type) Implement Pump Flow – gpm (L/min) Steering Pump Flow – gpm (L/min) Lift Capacity (24 in. behind link arm) lb(kg) |
2250 psi Double Gear 8.9 (33.7) 6.3 (23.9) 1356 (615) |
PTO Speed – 2 speed Type Clutch Type 3-Point Hitch Category 1 |
540/1000 Rear - Independent Dry Standard |
Dimensions Overall Length in. (mm) Overall Width (Minimum) in. (mm) Height to Top of Canopy in. (mm) |
132.0 (3370) 58.5 (1486) 94.0 (2388) |
Weight Tractor Construction Weight lb. (kg) Operating Weight lb. (kg) |
3131 (1420) 3400 (1542) |
Tires Agricultural Front Tires Agricultural Rear Tire Turf Tires or Industrial Tires (Optional) – Front Rear |
7.50 - 16 12.4 – 24 10-16.5 16.5-22.5 |
Safety Roll Bar (ROPS) Anti Start Clutch Switch Options Folding Roll Bar (Folding ROPS) Canopy (Sunshade) Rear Wheel and Front Weights Rear Work Lights Safety Seat Belt |
Standard Standard
Standard Standard Standard Standard Standard |
TOP OF THE PAGE
 |
NORIKER 354 C
|
Type |
4×4wheel |
|
Rated Traction Force |
8.3 kN (1,865.9 lbs) |
|
Constructional Weight |
1440 kg ( 3,175 lbs ) |
|
P.T.O. Max. Power (kW) |
23.7 kW ( 31.8 HP ) |
|
Front Wheel Tread |
1215mm, 47.8 inch (adjustable) |
|
Rear Wheel Tread |
1150 mm, 45.3 inch (adjustable) |
|
Wheel Base |
1840 mm, 72.5 inch |
|
Minimum Turning Radius |
With One-side Braking |
2.8 m ±0.2, 110.2 inch |
Without Braking |
3.0 m ±0.2, 118.2 inch |
|
Ground Clearance |
320 mm, 12.6 inch |
|
Overall Dimensions |
2910 ×1500 ×2335 mm (124.5”x59.5”x92”) |
|
Engine |
||
Type |
Yd485 |
|
Bore × Stroke |
85 mm ×90 mm, (3.35”x 3.54”) |
|
Rated Revolution |
2300 rpm |
|
Rated Power |
25.7 kW, ( 34.5 HP ) |
|
Max. Torque |
108.0 Nm ( 955.9 ft x lb ) |
|
Speed of Max. Torque |
1600 rpm |
|
Fuel Consumption |
≤247 g/kw.h |
|
Lubricating Method |
Pressure and Splash Lubricating |
|
Cooling Method |
Water cooling |
|
Transmission |
Shuttle transmission |
|
Clutch |
Two Stage |
|
Gear Box |
Spur Gear (4+4) × 2 Compound Shaft |
|
Working Devices |
||
Lifter Tilling Depth Control |
Draft Positional Adjustable |
|
Max. Lifting Capacity |
≥4.96 kN ( 1,115.0 lbs ) |
|
Suspension Type |
Three-Point, Cat. Ⅰ |
|
P.T.O. – 2-speed |
540, 1000 rpm |
|
Steering |
Hydrostatic power steering |
|
Remotes |
Two remote oil outputs |
|
Safety |
Safety roll-bar |
|
Rear Tires |
AG type 12.4-24 |
|
Front Tires |
AG type 7.5-16 |
|
Canopy |
Standard |
|
TOP OF THE PAGE
